Crown D45 Power Amplifier

The D 45 is perfect for moderate power applications such as recording or broadcast studio near field monitoring, video suite audio monitoring, a recordingbroadcast headphone amp or a small paging system. Crowns ABB circuitry ensures efficient use of output transistors while incorporating protection against shorted, open, mismatched or low impedance loads. Designed, built and carefully checked to ensure reliable operation with a wide variety of loads, Crown D Series amplifiers are convection cooled. Their high reliability is particularly important in reducing maintenance costs. Specification Signal to Noise Ratio unweighted 106 dB below full rated power from 20 Hz to 20 kHz. Input Impedance 20

More...

K ohms balanced, 10 K ohms unbalanced. Controls Power, channel 1 and 2 detented level controls, dualmono jumper. Connectors Inputs Balanced three pin Neutrik combination XLR and 14 in. phone jack for each channel. Output Four terminal barrier block two per channel and stereo headphone jack. AC Line Standard three wire grounded connector. Dimensions 19 in. 48.3 cm standard rack mount width, 1.75 in. 4.4 cm height, 8.38 in. 21.6 cm depth behind mounting surface. Net Weight 10 lbs. 9 oz 4.8 kg. Shipping Weight 10 lbs. 9 oz 4.8 kg. Total Harmonic Distortion THD Less than 0.001 from 20 Hz to 400 Hz and increasing linearly to 0.05 at 20 kHz delivering rated power into 8 ohmschannel. Intermodulation Distortion IMD 60 Hz and 7 kHz 41 Less than 0.05 from 0.01 to 0.25 watt and less than 0.01 from 0.25 watts to rated power into 8 ohmschannel. Load Impedance Rated for 4 to 16 ohms in Stereo and 8 to 16 ohms in Bridge Mono. Safe with all types of loads. Maximum Average Power at 1 kHz with No More than 0.1 THD 20 watts into 16 ohms, 25 watts into 8 ohms, 35 watts into 4 ohms. Output Power in Bridge Mono Mode 70 watts into 8 ohms.
Close...

Price: $738.00	Check Availability
Review This Product

Review Crown D45 Power Amplifier

Close...

Power Amplifiers

Crown Power Amplifiers